Description:
Lock-tile is a tough and flexible interlocking floor tile concept that has been developed to provide "instant" self lay floor surfacing for use in a wide variety of areas including heavy-duty and high traffic applications.
For many years the original Lock-tile system has been applied by countless users in all kinds of industrial, commercial and residential locations. Lock-tile is used in new buildings as well as for the renovation of existing floors where high standards of quality are required.
CLEANING:
As with any type of floor regular cleaning will maintain Lock-tiles®’ attractive appearance and ensure maximum life for your floor.
Regular light cleaning is preferable to infrequent heavy cleaning.After sweeping, any type of mop and general purpose cleaning detergent may be used to clean your Lock-tile® floor. However in order to obtain best results and maximum life from your floor we recommend using a microfiber mop and double bucket mop system available from most hardware or janitorial supply centers, together with a neutral PH cleaning detergent such as Fabuloso® all purpose cleaner. For larger areas a cylindrical scrubber dryer may be used.
MAINTENANCE:
Although Lock-tile® is resistant to oil and most chemicals (see technical specification sheet) Nonetheless, it is prudent to remove any spillages as soon as possible.
Specification:
COMPOSITION: 100% PVC (100% RECYCLABLE)
BLACK & GRAY 100% RECYCLED PVC
COLORS 70% RECYCLED PVC CONTENT
DIMENSIONS: EACH TILE WITH INTERLOCKING
FOUR TILES LOCKED TOGETHER 195/8” X 195/8” 387/8” X 387/8” 499mm X 499mm
987mm X 987mm
THICKNESS: 1/4” 6.75mm
WEIGHT: EACH TILE
PER sq/m
PER sq/ft 4.25 lbs 1.62 lbs 1.93 kg
7.91 kg
FLOOR AREA COVERAGE: EACH TILE 2.60 sq/ft 0.242 sq/m
FINISHES: RAISED DISK SMOOTH TEXTURED
COLORS: Blue, Green, Yellow, Orange, Red, Brown, Black, Grey, Tan, White
Technical Information:
HARDNESS: (SHORE A) 90 (+/- 3) ASTM 2240
MOISTURE ABSORPTION: LESS THAN 3% BY WEIGHT
(72H @70°F) ASTM D-0471
SPECIFIC GRAVITY: 1.37 (+/- 0.02) ASTM D-792
TENSILE STRENGTH: 2700 PSI ASTM D-638 100%
MODULUS: 2700 PSI ASTM D-412
Testing
| passes ASTM E 652-93 |
SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOLID MATERIAL
(ALSO REFERENCED AS NFPA 652-93) |
| passes ASTM E 648-97A |
CRITICAL RADIANT FLUX OF FLOOR COVERING SYSTEMS
USING RADIANT HEAT ENERGY SOURCE
(ALSO REFERENCED AS NFPA 253 AS FTM STANDARD 372) |
| passes ASTM D-2047 |
STATIC COEFFICIENT OF FRICTION. CONFORMS TO AMERICANS
WITH DISABILITIES ACT ( ADA) SPECIFICATIONS |
| passes ASTM D-149-97A |
DIELECTRIC STRENGTH – EXCEEDED 45 KV |
Chemical Resistance
| ACIDS |
SULFURIC ACID 95%
NITRIC ACID 70%
HYDROCHLORIC ACID
ACETIC ACID |
NO EFFECT
NO EFFECT
NO EFFECT
NO EFFECT |
| ALPHATICS |
KEROSENE
CHLOROFORM |
VERY SLIGHT SURFACE DULLING
SURFACE DULLING, SURFACE ATTACK |
| ALKALIS |
SODIUM HYDROXIDE |
NO EFFECT |
| KETONES & ESTERS |
ACETONE
METHYL ETHYL KETONES |
SURFACE DULLING, SURFACE ATTACK
SURFACE DULLING, SURFACE ATTACK |
| ALCOHOLS |
METHYL ALCOHOL |
NO EFFECT |
| AROMATICS |
XYLENE
CRESOL |
NO EFFECT
NO EFFECT |
| MISCELLANEOUS |
SILVER NITRITE
FORMALDEHYDE
10% BREADLINE
CLOROX |
NO EFFECT
VERY SLIGHT SURFACE DULLING
NO EFFECT
NO EFFECT |
| ALSO RESISTANT TO |
WATER, MOLD, MILDEW, OIL, GASOLINE AND MOST SOLVENTS |
CLEANING:
As with any type of floor regular cleaning will maintain Lock-tiles®’ attractive appearance and ensure maximum life for your floor.
Regular light cleaning is preferable to infrequent heavy cleaning. After sweeping, any type of mop and general purpose cleaning detergent may be used to clean your Lock-tile® floor. However in order to obtain best results and maximum life from your floor we recommend using a microfiber mop and double bucket mop system available from most hardware or janitorial supply centers, together with a neutral PH cleaning detergent such as Fabuloso® all purpose cleaner. For larger areas a cylindrical scrubber dryer may be used.
|
